Sennheiser EW300 G3 HSP4 Headset
Hear better, perform better. Sennheiser monitoring systems are trusted by professionals worldwide and now are better than ever. Featuring an adaptive-diversity receiver, the receiver pack uses the headphone cable as a secondary antenna for flawless reception. Ear-canal phones, with various ear-fitting pads for an individual fit, reproduce the signal from the adaptive diversity receiver precisely and faithfully. Pass-through outputs allow easy splitting of the input signal to travel to other devices. Lastly, the entire set can be monitored and remotely controlled with Sennheiser’s “Wireless Systems Manager” software due to the built-in Ethernet port on the stereo transmitter.
- Description
- Technical Specification
Description
Read this instruction manual.
• Keep this instruction manual. Always include this instruction manual when passing the
products on to third parties.
• Heed all warnings and follow all instructions in this instruction manual.
• Only clean the products when they are not connected to the mains. Use a cloth for cleaning.
• Only use attachments/accessories specified by Sennheiser.
• Refer all servicing to qualified service personnel. Servicing is required if the products have
been damaged in any way, liquid has been spilled, objects have fallen inside, the products
have been exposed to rain or moisture, do not operate properly or have been dropped.
• WARNING: To reduce the risk of fire or electric shock, do not use the products near water
and do not expose them to rain or moisture.
Compander HDX
Audio-XLR connector 2 x XLR-3 jack
Presets 16
Frequency response 25 – 15000 Hz
THD, total harmonic distortion 0,9 %
Signal-to-noise ratio > 90 dB(A)
RF frequency range 516…865 MHz
RF output power 10/30 mW
Transmission/receiving frequencies 1680
Switching bandwidth 42 MHz
Peak deviation +/- 48 kHz
In compliance with ETS 300422, ETS 300445, CE, FCC
Operating time 4 – 6 h
Modulation FM, MPX-stereo
Antenna connector BNC
Headphone connector > 100mW (32 Ω)
Input voltage range + 22 dBu max
Audio-Output-Power 100 mW (32 Ω)
Operating voltage (stand alone) 12 V DC nom.
