Schoeps CMC 6U
The CMC 6 is our most popular amplifier.
Its electrical properties have set new standards in terms of low distortion levels and common mode rejection (i.e. suppression of interference induced in the microphone cable).
- Description
- Technical Specification
Description
flat frequency response
very low harmonic distortion and noise
works with 12V and 48V phantom power
balanced, low-impedance output
high suppression of interference on the microphone cable
excellent protection against high-frequency radio interference with “RFI Shield”
frequency-independent impedance
signal transmission possible over very long cables
reliable operation even with weak phantom power
symmetrical, transformer- and capacitor-free output stage with a class-A amplifier
above 20 kHz, the signal is attenuated for protection against interference in the ultrasonic range, e.g. through the ultrasonic autofocus of a film camera
Frequency range:20 Hz – 20 kHz
Sensitivity: see corresponding capsule
Maximum output voltage: 1 V (0 dBV) with 1 kΩ load
Low cut filter: 20 Hz, 12 dB/oct.
Minimum recommended load impedance: 1 kΩ
Maximum sound pressure level (THD < 0.5 %): with MK 4: 131 dB-SPL (P48, P12)
Output impedance: 42 Ω
Maximum cable length: > 400 m / ~1300ft
SCHOEPS RFI Shield: Yes
Powering standard / Valid range :
P48 / 20-52 V
P12 / 10-13 V
Current consumption:
4 mA (P48)
8 mA (P12)
Common mode rejection ratio (at 1 kHz): > 55 dB
Output: XLR-3M, analog, 1 channel
Length: 116 mm / ~4,5″
Diameter: 20 mm / ~0,8″
Weight: 60 g / 2,1 oz
