Martin Rush MH3
The RUSH MH 3 Beam is a powerful beam moving head that blasts an intense and narrow long-throw beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer, strobe effect, 8-facet prism and focus.
- Description
- Technical Specification
- MEDIA
Description
Reviews
“We never thought we’d see a 190W light that we could use in Wembley Arena.”
2010 PLASA Jury
“This is the type of output normally seen with Xenon fixtures, not sub-200W lamps that could pass as carry-on luggage.”
Patrick Dierson, Live Design, February 2011
- 189W discharge lamp (Platinum 5R o Osram Sirius 190 Plus)
- Perfectly parallel, laser-like beam, sharply defined and free of any halo
- Unprecedented brightness – comparable to wattages many times higher (59,760 lx at 20m)
- Adjustable beam angle from 0 to 3.8°
- Interchangeable color wheel with 14 fixed colors
- Interchangeable gobo wheel with 17 fixed gobos
- 8-facet rotating prism
- Mechanical dimmer
- Frost Filter
- Rapid and extensive pan and tilt movements
- New, high-performance electronics
- Patented Italian design
- Small, lightweight and easily transported (only 48 cm x 19 Kg)
- Eco-friendly: replaces far larger and more expensive spotlights
- Art-Net / RDM
- Electronic ballast fitted as standard
- Available in “mirror-finish” chrome version
CONTROL AND PROGRAMMING
Control: DMXDMX channels: 19Setting and addressing: Control panel with LCD displayDMX compliance: USITT DMX512/1990
LAMP
Approved lamp: Philips MSD Platinum 5RColor temperature: 8000 KCRI (Color rendering index): 75Average lifetime: 2000 hours
OPTICS
Zoom range: 1° – 3.8°
CONSTRUCTION
Color: BlackHousing: High-impact flame-retardant thermoplasticProtection rating: IP20
INSTALLATION
Minimum distance to illuminated surfaces: 12 m (39 ft. 5 in.)Mounting points: Two quarter-turn brackets for rigging clampsLocation: Indoor use only, must be fastened to surface or structureOrientation: Any
CONNECTIONS
AC power input: Neutrik PowerConDMX data in/out: 3-pin and 5-pin locking XLR
ELECTRICAL
AC power: 100-240 V nominal, 50/60 HzTypical total power consumption: 350 WPower consumption figures are typical, not maximum. Allow for +/-10% variation.
TYPICAL POWER AND CURRENT
110 V, 60 Hz: 3.1 A, 348 W, PF 0.990230 V, 50 Hz: 1.6 A, 330 W, PF.0.917Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
THERMAL
Cooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%): 1200 BTU/hr.
APPROVALS
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety: UL 1573US EMC: FCC Part 15 Class ACanadian safety (pending): CSA C22.2 No. 166Canadian EMC: ICES-003 Class AAustralia/NZ: C-TICK N4241
INCLUDED ITEMS
Power cable, 1.5 m, without mains plugMounting brackets
RELATED ITEMS
RUSH™ Software Uploader 1: P/N 91611399
ORDERING INFORMATION
RUSH MH 3 Beam™ in cardboard box: P/N 90280010
